What Should We Kown About Flotation Machine?
.jpg)
Widely used in copper ore flotation machine flotation, gold ore and molybdenum mine equipment selection, then the routine use of flotation machines which need attention?
First, the flotation devices on the rational use of
1. A flotation ore processing equipment to be uniform, not excess.
2. Control the pulp density and agents.
3. Adjusting the flotation device into the air.
4. The flotation tank may not have wood, rags and other debris.
5.
Flotation equipment, parking, parking shall be in the
ball mill after 20 minutes before stopping.
Second, flotation equipment operation and inspection of
1. A pre-preparation, rack, motor base, loose screws on the main bearings.
2. Flotation equipment, tank leaks.
3. Flotation equipment, scraper and scraper shaft is intact.
4. Flotation devices if the tank debris.
5. Slurry pipes are kept clear.
6. Each lubrication point whether there is oil.
7. V-belt tension should be appropriate.
8. The pulley installed without loosening.
9. V-belt is a broken trace.
10. Knife switch box is intact.
11. Ministries screws, contacts are good.
Third, methods of operation to drive the order of
1. Lose the switch box knife. Move the pulley by hand after that you can start light unimpeded by the start button, and pay attention to the sound of the motor. The scraper motor starting, normal operation can be everything to mine.
2. Stopped motor scraper, pull down the switch box knife.
3. Without notice, blackout, you can pull down the switch box.
Hot Product
